Multichannel Controller, 8 Channels, Class 2, II and III

Metrolight's LED multichannel controller is used with Metrolight's LED drivers to power multiple LED arrays or multiple LED fixtures. The controller provides double isolation to comply with Class 2 (USA) and Class II/III (EU) regulations.   The controller supports independent channels and offers the following main features:
         - Up to 8 individual channels
         - Accurate balancing of each channel's current
         - LED failure protection: automatic balancing of remaining channels
         - Disconnection of any channel automatically reduces the current and balances the
           remaining channels

General Specifications

• DC Voltage Range: 20-60V
• Max. Output Current: 8A (1A per channel)
• Voltage Protection Cut Off: 60V
• LED Disconnection: Fully protected
• LED Short Circuit: Fully protected
• Thermal Protection: Fully protected
• Operating temperature range: -30°C to +65°C / -22°F to 149°F
• Operating humidity: 0 to 95% RH non-condensing
• Maximum case temperature (Tc)*: 85°C / 185°F at test point

*Must be mounted on a metal surface to allow proper heat dissipation.

Download Multichannel Controller, 8 Channels, Class 2, II and III Datasheet