About Metrolight
Technology Overview
Control & Management
EcoPOD System
Highbay Kit - EcoPOD
SmartHID Ceramic Solutions
Metrolight LitoComTM LED Driver Communication Interface
VDrive - Driverless Driver™
Metrolight DLD™ 480W Programmable IoT DriverlessDriver™ (Coming Soon)
LUMISQUARE - High Brightness, High Bay LED Fixture
Metrolight LitoPower™ 200W
LitoDrive Overview
LitoDrive 40W
LitoDrive 75W
LitoDrive 90W
LitoDrive 105W
LitoDrive 150W
LitoDrive HV 200/S*
LitoDrive 200W
LitoDrive 240W
LitoDrive 320W
LitoRemote IR Remote Control
LED Overview
Smart Tool LED Software
50-150W Programmable LED Driver
150-450W Programmable LED Driver
450-600W Programmable LED Driver
Class I Converter
Class 2 (USA) & II/III (EU) Converter
Multichannel Controller, 4 Channels Class I
Multichannel Controller, 8 Channels, Class 2, II and III
1 LED Driver for Multiple Fixtures
Programmable LED Light Engine Kit
High Bay LED Fixture
Highbay LED Fixture (low profile)
Area Lighting LED Fixture
Floodlight LED Fixture
eHID to LED Technology
Auto Dealerships & Parking Lots
Logistics & Warehousing
Urban & Street Lighting
Gas Stations
Case Studies
Partners Worldwide
Your Local Partner
Partner Zone
Become a Partner
Press Releases
In the News
1,000W Retrofit Program
CO2 Calculator
ROI Calculator
Incentive & Rebate Information
Contact Form
Metrolight Offices

LitoDrive 105W

Metrolight’s new competitively priced LitoDrive LED driver technology is a highly efficient programmable solution for driving and controlling LEDs. The driver offers complete adaptability to the user’s needs, and the LED design. Once selecting the required output current (which can be re-programmed at any time) the driver automatically applies the adequate current and voltage to the LEDs.
Metrolight LitoDrive LED drivers are all self-contained to provide a simple and reliable LED structure implementation. The drivers include a dimming port as standard, and full input protection capabilities - making the driver ideal for street light applications, without the need for additional expensive protection devices to be added.
Metrolight LitoDrive LED drivers also include SELV (Super Electrical Low Voltage) versions, meaning that a 320W driver can supply its full power in low voltage configurations. Coupled with our multi-channel controller, this is a versatile solution - even for high power fixtures. Using this capability you can convert a Class I (often with serially connected strings) fixture to a Class II with some minor changes, gaining dramatic improvement of product reliability by avoiding failures that are related to the LED’s insulation breakdown, as can happen with class I applications. Additionally, the multichannel provides accurate equal current splitting between the LED’s strings (with full protection) whenever LEDs are shorted, or if strings are disconnected.
LitoDrive Features & Advantages:

Programmable Output Current
Use handheld or PC programming Infra-Red line connector to configure the Litodrive driver
for a diverse range of fixtures and applications.

Outstanding reliability
Metrolight’s long track record of reliable products and commitment to quality is preserved and
extended in this product line, from trustworthy design and component sourcing
to vigorous testing and quality assurance.

5 Year warranty
Read our comprehensive 5 year warranty agreement

Water proof IP67 compliance design and construction
Rugged waterproof design makes this product line, readily applicable to both indoor and harsh outdoor environments.

3-in-one dimming port
 Built-in standard dimming port that can be configured to:
 a. Five steps auto-dimming with simple programming procedure.
 b. 0 – 10 Volt linear dimming control, or
 c. 0 – 5 Volt linear dimming control
 d. PWM dimming control

High input 10KV surge protection
In-built surge protection essentially eliminates the need for special add-ons for surge Protection.

High efficiency IP67, programmable driver family, from 40W to 320W with a revolutionary multi-channel "add-on"

UL-LT certified "just launched" UL certification program, which allows immediate replacement of drivers in UL certified bodies without the need for renewed certification

Multi-Channel “Add-On”, which controls each channel accurately for equal current splitting, and providing ultimate protection for each light string malfunction or LED failure.

Allows OEM’s to reduce number of drivers, therefore reducing space and cost with increasing total system reliability.

Allow OEM’s to move from Class I serial connectivity, to parallel Class II connectivity

Download LitoDrive 105W Datasheet